You have no items in your quote list.

*Images Are For Representation Purpose Only Actual Product May Differ

Nellcor N-600x Pulse Oximeter (Refurbished)

Quick Overview

Features :
Display Type
* vacuum fluorescent & LEDs. Display are: 140.6mm x 35mm. Resolution: 256 x 64 pixels. Pixel size: 0.4 x 0.4 mm
Controls and Indicators
* Front panel: on/standby; freeze; menu; pulse tone volume, up and down; alarm off; alarm off indicator; battery charging indicator; function keys (4), software configured. Rear panel: mains AC power ON/OFF control.
* Front panel: connector for mainstream CO2 sensor cable; connector for SpO2 cable. Rear panel: power cord receptacle; fuse block; RS-232 input/ output port; C-lock ECG synchronization input (3/32⬠ mono phone jack).
Capnograph Display Range
* 0-99 mmHg. Breath rate: 0-150 breaths/min. Accuracy: ±2 mmHg for 0-40 mmHg, ±5% of reading (increasing linearity 0.8% for every 10 mmHg) for 41-99 mmHg. Response time: less then 60 ms. Alarms: apnea; sensor dis connect; high/low ETCO2; high/low breath rate; high/low inspired CO2.
Pulse Oximeter Display Ranges
* 0-100% SpO2, 20-250 beats/min pulse rate. Accuracy: Adults: 70%-100% ±2 digits, 0-69% unspecified; Neonates: 70%-95% ±2%, 0-69% unspecified. Wavelengths: 660 nm (red, nominal); 920 mm (infrared, nominal). Heat dissipation: non-heated: less than 50 mW total heat dissipation by LEDs (typically less than 1° C temperature rise). Alarms: pulse search; high/low SpO2; high/low pulse rate; SpO2 sensor disconnect.
Co2 Sensor Type
* mainstream. Size: <12.5 mm3 (0.5 in3). Weight: less than 10 grams. Cable length: 3 meters (9.84 feet). Calibration: annual accuracy check; no user calibration required. Temperature: 42°C nominal
Electrical Power requirements
* 00/120V ~, 50/60 Hz, 500 mA; 220/240V ~, 50/60 Hz, 250 mA. Digital/Ana log input voltage: ±30 VDC, maximum. Leakage current: 10 μA maximum (for 110V; 20 μA maximum for 220V) from patient connections to ground or AC mains; 100 μA maximum from AC mains to chassis ground.
Battery Type
* Sealed lead acid. Operating time (fully charged): 90 min. nominal, 180 min.without graphics. Recharge period: 12 hrs typical. Charger type: internal, current limited, constant voltage.Battery fuse: 1XT 2.5 A, 250V, 3 AG.
AC Fuses
* 100/120 V ~ 1 XT 1.0 A, 250V, 3AG; 220/240 V~ 2 X T 0.5 A, 5x20 mm

Check Delivery Availability

Specifications :
* The Nellcor N-600x pulse Oximeter with OxiMaxâ ¢ technology delivers exceptional performance throughout the hospital, so you can confidently monitor even your most critically ill patients.
* While some Oximeter may have trouble acquiring a pulse signal during low perfusion and signal interference, the Nellcor N-600x Pulse Oximeter with OxiMax technology achieves accurate, reliable readings during these difficult conditions.
* The Nellcor N-600x pulse Oximeter includes our unique Sat Seconds alarm management technology to safely reduce nuisance alarms that can interfere with staff productivity.
* CO2/SpO2 with waveform,
* Microprocessor-controlled instrument for continuous real-time monitoring for oxygen saturation (SpO2), pulse rate (PR), end tidal carbon dioxide (ETCO2), and respiratory rate (RR).

Use spaces to separate tags. Use single quotes (') for phrases.


Write Your Own Review

How do you rate this product? *

  1 * 2 * 3 * 4 * 5 *
Medikabazaar is a B2B technology platform for supply of medical equipment and consumables to Hospitals, Nursing Homes, Clinics and Medical centers.